Buying & Fitment Guides

← Tech Center

Buying & Fitment Guides

Classic GM parts often look alike from year to year but don't fit the same. These guides walk you through what to check before you order, so the part fits the first time.

1. Finding the right part for your exact car

Year, make and model is a start, but on a classic GM car it's often not enough. Two cars that share a name can need different parts because of body style, trim level, factory options or a mid-year change.

Gather these before you shop

What Where to find it Why it matters
Model year VIN (see our decoders) Many parts changed every year. A 1968 and a 1969 Camaro share very little trim.
Body style VIN body code (for example 37 = hardtop, 27 = post coupe, 67 = convertible) Weatherstrip, glass, moldings and roof parts depend on it
Trim level / series VIN series, cowl tag style number Malibu vs. base Chevelle, Custom vs. Standard trucks, Esprit vs. Trans Am
Interior trim code Cowl tag (TR), or the SPID on trucks Color and material for seat covers, carpet, door panels and dash parts
Paint code Cowl tag (PNT); see our paint code lookup Stripe and emblem colors were often matched to the body color
Options Build sheet, SPID (trucks), Protect-O-Plate, or what's on the car Power windows, A/C, bucket seats, rally gauges and SS/Z28/GT packages all change part numbers

Then use our Year/Make/Model search

Use the vehicle search at the top of the store to narrow the catalog, then read each listing's Applications list and description for body-style and option notes. If a listing mentions a specific body style, trim or option, match it against what you found above.

Not sure? Email customerservice@joltparts.com with your VIN, body style and a photo of the old part. We'd much rather answer a question than process a return.

2. Choosing weatherstrip

Weatherstrip is one of the most common restoration purchases, and one of the most commonly mis-ordered.

  • Match the roofline, not just the model. A hardtop (no B-pillar) uses completely different door and roof rail seals from a post coupe (pillar) or a convertible. Check the body code in your VIN.
  • Know which seals you need. The common ones are door seals (on the door or the body opening, depending on the car), roof rail seals (hardtops and convertibles), the trunk seal, window "fuzzies" (beltline sweeps, inner and outer), quarter window seals, and the windshield and back glass gaskets.
  • Buy in matched sets when you can. New seals installed next to old, hardened ones often leak or keep a door from closing evenly.
  • Expect new seals to be firm at first. Doors may close hard for the first weeks while the rubber settles in. Check door and window alignment before you blame the seal.
  • Check how it attaches. Some seals clip in, some glue in and some use both. Have the right adhesive and clips on hand (see the install how-tos).

Shop Weatherstrip & SealsSoffSealWindow & Door Parts

3. Buying emblems, decals and stripes

  • Check the year closely. Emblems often changed with the trim package or model year, even when the car looked the same. Compare your photos to the listing photos.
  • Check the mounting style. Emblems mount with studs and speed nuts, with clips, or with adhesive tape. A stud emblem needs the matching holes in the panel. Don't drill new holes until you're sure.
  • Match the body and package. SS, Z28, GTO, Judge and 4-4-2 stripes and decals are package-specific. They should match what the car was built with (cowl tag, build sheet) if you want it correct.
  • Stripe colors: many factory stripes came in a color picked to go with the paint. Our paint code lookup will tell you your original color.
  • Order hardware with it. Old speed nuts and clips rarely survive removal.

Shop EmblemsShop DecalsJim Osborn Reproductions

4. Lenses, bezels and lighting

  • Left and right are different parts. "Left" means the driver side and "right" means the passenger side, as you sit in the car.
  • Check for package differences. Rally Sport, GT and SS cars often used different grilles, headlight setups, parking lamps and tail lamps from base cars.
  • Replace the gaskets. A new lens on an old, hard gasket will let water in. Order the lens gaskets at the same time.
  • Thinking about LED? Some older cars need an LED-compatible flasher so the turn signals blink at the right speed. Check the product notes.

Shop LightingUnited Pacific

Frequently asked questions

Is the left side the driver side?
Yes. On parts listings, left means the driver side and right means the passenger side, as you sit in the car.
Does a hardtop use the same weatherstrip as a post coupe?
No. A hardtop (no B-pillar) uses completely different door and roof rail seals from a post coupe or a convertible. Check the body code in your VIN before you order.
What do I need to know before ordering parts for a classic GM car?
Gather the model year, body style, trim level, interior trim code, paint code and factory options. Our VIN and cowl tag decoders help you find them, and the listing's Applications list and notes tell you what it fits.
Why do my turn signals blink fast with LED bulbs?
Some older cars need an LED-compatible flasher so the turn signals blink at the right speed. Check the product notes for your bulbs.

Ready to install? See our install how-tos.