GM Engine Block Casting Number Lookup

← Tech Center

GM Engine Block Casting Number Lookup

The casting number cast into the block tells you its size and the years it was made. Type a Chevrolet or Oldsmobile block number below, or use the tables for Buick and Cadillac, which are easier to identify by size and markings. Pontiac? Use our Pontiac engine codes & casting numbers page.

Chevrolet & Oldsmobile casting number lookup

Read this first: a casting number tells you the block, not the engine it came in. The same casting was often used for several sizes and years (for example 3970010 was used for 302, 327 and 350 engines), so check the date code and the engine stamp too. Casting lists are compiled by enthusiasts and some numbers are not fully verified.

Where to find the numbers

Make Casting number Other clues
Chevrolet small and big block On the ledge at the rear of the block, usually on the driver side where the bellhousing bolts on The engine stamp (plant, date and suffix code) is on the pad in front of the passenger-side cylinder head
Oldsmobile Big blocks: on the shelf behind the water pump. Small blocks: cast above the right-hand center freeze plug (before 1977) A large ID letter or number is cast near the casting number, for example F or Fa for the common 455. Small blocks are about 12 in. wide at the intake; big blocks about 14 in.
Buick 400, 430 and 455 blocks have their actual size cast in the transmission mount saddle above the casting number 1968 and later big blocks: serial number between the two front spark plugs and the left exhaust manifold, production code by the rear plugs
Pontiac See our Pontiac engine page From 1970 the size (350, 400, 455) is stamped on the front of the block

Buick V8 identification

Size Bore x stroke Years Family & clues
215 3.500 x 2.800 1961–63 Aluminum small block (a magnet won't stick)
300 3.750 x 3.400 1964–67 Small block; 1964 has aluminum heads on an iron block
340 3.750 x 3.850 1966–67 Small block, 4-bolt valve covers
350 3.800 x 3.850 1968–81 Small block, 6-bolt valve covers, taller deck than the 300/340
400 4.040 x 3.900 1967–69 Big block; size cast in the bellhousing area
430 4.1875 x 3.900 1967–69 Big block; size cast in the bellhousing area
455 4.3125 x 3.900 1970–76 Big block; size cast in the bellhousing area
401 & 425 Nailhead 4.188 / 4.313 x 3.640 1959–66 Nailhead family, horizontal-mount valve covers

Cadillac V8 identification

Size Bore x stroke Years Family & clues
390 4.000 x 3.875 1959–63 Rear-mounted distributor through 1962
429 4.125 x 4.000 1964–67 4-bolt valve covers
472 4.300 x 4.060 1968–74 Modern big block, 9-bolt valve covers
500 4.300 x 4.304 1970–76 Same family as the 472, longer stroke
425 4.082 x 4.060 1977–79 9-bolt valve covers
368 3.800 x 4.060 1980–84 9-bolt valve covers

Cadillac and Buick block casting number lists are not fully documented here; the size and features above are the most reliable way to identify them.

Rebuilding or dressing an engine?

Engine partsEngine decalsCoolingAir & Fuel

More tools: Chevy engine suffix codes · GM specs & firing orders · Is it real? checklists

Frequently asked questions

Where is the casting number on a small block Chevy?
On the ledge at the back of the block, usually on the driver side, where the bellhousing bolts to the engine.
Is 3970010 a 350?
It can be. 3970010 was used for 302, 327 and 350 blocks with 2-bolt or 4-bolt mains over many years, so check the date code and the stamped suffix code to know which engine it is.
How do I tell an Olds 350 from a 455?
Measure the intake manifold: about 12 in. wide on a small block (350) and about 14 in. on a big block (455). The common 455 casting is 396021 with an F or Fa ID letter.
How can I tell a Buick 455 from a 400 or 430?
Buick cast the actual size of the block in the transmission mount area above the casting number on the 400, 430 and 455.

Compiled from Chevrolet and Oldsmobile enthusiast casting lists and Buick club identification guides, cross-checked where possible. Not affiliated with General Motors.