Pontiac Engine Codes, Casting Numbers & Torque Specs

โ† Tech Center

Pontiac V8 Engine Codes, Casting Numbers & Torque Specs

Look up the two-letter block code stamped on any 1964โ€“81 GTO, LeMans, Tempest, Firebird or Trans Am V8. Find out where the code is, how to date the block, and the torque values you need for a rebuild. Wherever sources disagree, the conflict is shown in the yellow Notes & conflicts column.

Codes repeat across years. Pontiac reused the same two letters year after year. For example, YS was a 389 in 1965โ€“66 and a 400 automatic from 1967 on. A code alone can't tell you which engine you have. Always match it with the casting date and casting number (see below).

Where to find the codes

What Where What it tells you
Engine code (2 letters, 3 characters in 1964) Machined pad on the front of the block, passenger side, just below the cylinder head. A 6-digit engine production number sits beside it. Size, horsepower, carburetor and transmission. The production number does not match the car's VIN.
Partial VIN Same front pad. Pontiac began adding it during 1967 and used it on all later engines. The car the engine was built for. Use it to check numbers-matching claims.
Casting date Back of the block, next to the distributor hole Format is month letter, day, year digit. A249 = January 24, 1969. Letters run A = January through L = December. In 1967 Pontiac used M for December.
Casting number Back of the block, driver side, near the bellhousing Block family and year (see table below)
Displacement Cast into the side of the block from 1968, and in the lifter valley A quick check for 350 / 400 / 428 / 455
Head code Cast above the center exhaust ports Head number, e.g. 1968 31/37 = Ram Air, 1970 12/13 = Ram Air III

Freeze plugs: blocks have two per side through 1966 and three per side from 1967 to 1978. This is a fast way to tell a 389 from a 400 when the stamps are hard to read.

Common GTO / Firebird block casting numbers

Year Size Casting number
1964 389 9773155
1965โ€“66 389 9778789
1967 400 9786133
1968 400 9790071 or 9792506
1969 (Ram Air IV) 400 9792506 (4-bolt mains)
1971โ€“72 400 481988

Pontiac V8 torque specs

These apply to 326, 350, 389, 400, 421, 428 and 455 Pontiac engines with stock fasteners. Aftermarket heads, studs and rods come with their own instructions, and those values take priority.

Fastener ft-lbs Notes & conflicts
Cylinder head bolts 95 Some rebuild guides use 90. Torque in three steps (about 30, 60, then 95) in the factory sequence. Edelbrock aluminum heads use 105 on the upper row and 95 on the lower row.
Main caps (front four) 95โ€“100 Sources differ: 95 (Butler Performance chart) vs 100 (several rebuild guides).
Rear main cap 120 Sources agree.
Connecting rod nuts (stock) 45 Super Duty rods: 65. ARP rod bolts are set by stretch, not torque.
Harmonic balancer bolt 160
Intake manifold (cast iron) 40 Edelbrock's instructions for its aluminum intakes call for 25.
Exhaust manifold 30
Cam sprocket bolt 45
Timing cover to block 15โ€“35 Conflict: one chart says 35, another says 15. The bolt sizes vary, so check the bolt and go light on the small ones.
Oil pump to rear main cap 30
Oil pan bolts 12
Valve covers 8
Spark plugs (iron heads) 20
Rocker nuts (hydraulic lifters, stock) 20 Stock Pontiac rocker nuts torque to a set value. Adjustable/aftermarket nuts go 1/2โ€“3/4 turn past zero lash.

Firing order: 1-8-4-3-6-5-7-2. Cylinders 1-3-5-7 are on the driver side, front to back, and 2-4-6-8 are on the passenger side. The distributor turns counter-clockwise.

Frequently asked questions

Where is the engine code on a Pontiac V8?
On the machined pad on the front of the block, passenger side, just below the cylinder head. A 6-digit engine production number sits beside it, and from 1967 on the partial VIN is on the same pad.
How do I tell a Pontiac 389 from a 400?
Count the freeze plugs: two per side through 1966 and three per side from 1967 to 1978. Then confirm with the casting number (for example 9778789 for a 1965โ€“66 389 and 9786133 for a 1967 400) and the casting date.
Can the two-letter code alone identify my engine?
No. Pontiac reused the same codes year after year. YS was a 389 in 1965โ€“66 and a 400 automatic from 1967 on, so always match the code with the casting date and casting number.
How do I read a Pontiac casting date?
It's on the back of the block next to the distributor hole: a month letter, the day and the last digit of the year. A249 = January 24, 1969. Letters run A = January through L = December, though Pontiac used M for December in 1967.
What is the head bolt torque on a Pontiac V8?
95 ft-lb with stock bolts, in three steps (about 30, 60, then 95) in the factory sequence. Some rebuild guides use 90, and aftermarket heads and studs have their own specs.

Shop Pontiac parts

GTO & LeMansFirebird & Trans AmGrand PrixCatalinaBonnevilleEngineEmblemsDecals

See also: Pontiac production numbers ยท Pontiac paint codes ยท GM casting numbers ยท Is it real? checklists

Compiled from factory code lists published by Pontiac enthusiast references and parts suppliers. Torque values were checked against supplier charts and rebuild guides. Where sources disagree, both values are shown.